AJW U1304 Soap Dispensers are constructed of stainless steel featuring a satin finish. Unit features a recessed Lenox tank that has a capacity of 56 fl. oz. Theft resistant valve is designed to provide a pre-measured, drip free dispensing system. Dispenser is equipped with a sight gauge to indicate refill time. Contents of unit are secured with a tumbler lock, keyed like other AJW Cabinets. Please note that AJW U1304 Dispensers are recessed units that require a rough wall opening with the following dimensions: 9 1/8"W x 5 1/16"H x 4"D. Surface mounted option is also available (above).
Coordinate installation with architect and contractor to avoid interference with pipes vents etc. in wall. Remove face plate and install wall housing into wall opening with proper fasteners per application. Fill soap tank with proper soap and install into housing. Secure face plate and prime valve for dispensing soap. Soaps: All purpose low viscosity lotions and liquid synthetic detergents or oils, and vegetable based soaps should be used
Face Plate: Fabricated of #18 ga stainless steel with #4 satin finish, one piece construction with 1/2" returns to wall. Wall housing is fabricated of #22 ga pre-plated steel with 1/4" returns to wall for added rigidity. Soap capacity viewer is integral part of face plate.
Tank: Molded, translucent Lexon tank, shatterproof and corrosion resistant. Large opening for easy servicing and covered sides prevent spillage.
Valve: (U001U) Theft resistant chrome on brass all purpose bellows type soap valve, with chrome on brass hex nut. Neoprene seals and a stainless return spring will provide a pre-measured, drip free dispensing system. Valve cannot be removed without taking hex nut off.
Lock: Pin tumbler, commercial quality type lock is keyed like all other AJW cabinets.
Overall Size: 10"W x 6"H x 4 1/4"D
Wall Opening: 9 1/8"W x 5 1/16"H x 4"D
Capacity: 56 fl ounces
Model 1304-SM: Surface Mounted Unit
Shop All AJW Products